The StarTech.com 10/100 Mbps PCI Ethernet Adaptor is a high-speed, reliable network card for use in PC workstations, and workgroup servers. This model includes ACPI and Wake-on-LAN support, allowing the PC to be remotely turned on and managed over the network using a remote administration program. The card is fully PCI plug and play compliant, and has driver support for all versions of Windows, many versions of UNIX, Linux, and Novell Netware. Full Duplex support allows the card to send and receive simultaneously, allowing data transfer rates of up to 200Mbps if connected to a Fast Ethernet Switch.

Auto-setups IRQ and I/O address

Built-in FIFO buffers to eliminate external memory

Complies with industry standards: IEEE 802.3 CSMA/CD, 100BaseTX and 10BaseT standard

Full duplex design to double the performance to 20Mbps/200Mbps

Includes Wake On LAN (WOL) feature that allows users to configure network adaptors that are capable of monitoring network packets, even when the computer is turned off

One STP connector for 100Mbps or 10Mbps network speed

Provides diagnostic software and two LEDs to indicate network link/activity and 10/100Mbps selection

Supports 32-bit PCI Bus Master for high performance and low processor utilization

Supports Auto-negotiation function

Supports early interrupt on transmit to increase performance

Supports enhanced smart remote Boot ROM (optional) (BOOTPROM100S)

Supports ODI driver for NetWare 3.x/4.x NDIS driver for LAN Manager, Windows 95, Windows 98, Windows NT Packet Driver for TCP/IP software