You have added the following product:
Friday, 25 May 2012 | Receive the latest news & updates >
Search   
Netgear WG302 ProSafe 54 Mbps Wireless Access Point 802.11g
Netgear WG302 ProSafe 54 Mbps Wireless Access Point 802.11g
WG302UK
out of stock£186.46 inc VATOut Of Stock
 
 
Product Description
Integrated IEEE 802.3af-based Power over Ethernet (P) support eliminates extra cables and the need to locate near a power outlet, as the access point is powered over the Ethernet cable. Supports Simple Network Management Protocol (SNMP) MIB I, MIB II, and 802.11 MIB using SNMP-based network management software, such as HP OpenView. Supports all popular 802.1x port-based authentication protocols, including Extensible Authentication Protocol (EAP) Transport Layer Security (TLS), Protected EAP (PEAP), and Tunneled TLS (TTLS). Console port facilitates local configuration and monitoring. Users can remotely configure, update, and monitor multiple WG302's simultaneously via FTP. IEEE 802.11g wireless standard - with optional speeds up to 108 Mbps - takes care of business communications with great dispatch and skill. Delivers Wireless Distribution System (WDS) functionality for point-to-point and point-to-multi-point bridging and repeater modes. A fourth mode enables the WG302 to act as a bridge and access point simultaneously. Dynamic rate shifting guarantees the fastest possible connections. Auto Network Connect keeps users connected to the network even while roaming. Cost effective, simple to install and use. Plenum rated - appropriate for placement above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard' browser-based interface. Fitted with two external, detachable 5 dBi antennas - obtain NETGEAR's antenna and flexible point placement accessories separately for expanded wireless capacity and range. IEEE 802.11e-based Quality of Service (QoS) support is available via firmware upgrade. Protected with a NETGEAR 3-year warranty.

  • High-speed networking with IEEE 802.11g, up to 108Mbps in turbo mode
  • 40/64, 128 and 152-bit WEP data encryption
  • Wi-Fi Protected Access (WPA) with future upgrade
  • Wireless Distribution System (WDS) supports bridging and repeater modes
  • Can be used with FSM7326P for 802.3af Power over Ethernet support
  • SNMP MIB I, MIB II and 802.11 MIB support
  • Plenum rated; appropriate for placement above drop-down ceilings and under raised floors
  • Two (2) 5 dBi detachable antennas
  • Typical maximum power output: 19.8 dBm
  • Typical maximum receive sensitivity: 96 dB

    • Specifications
    Compliance
    StandardsIEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Technique), IEEE 802.3af Power over Ethernet (P), FCC Part 15 Subpart B and Subpart C, CE EN60950, EN 300328-2 v1.1.1 (2000-07), EMC EN301489-1 v1.2.1 (2000-08), and EN301489-17 v1.1.1 (2000-09), EN55022(B), CISPR22(B), AS/NZS 3548(B).
    CPU
    CPUIntel 422
    Electrical
    Power Adaptor Output Voltage12VDC
    Power CordPower adaptor is localized to country of sale
    Environmental
    EnvironmentalOperating Temperature 0 to 40°C - Humidity 0 to 90%
    General
    WarrantyThree Years.
    Interfaces/Ports
    10/100-BaseT Port Capacity1
    Physical
    Dimensions19.0cm (W) x 12.4cm (D) x 3.2cm (H) - Weight 0.574kg
    In The BoxProSafe 802.11g Wireless Access Point WG302, Two (2) 5 dBi Detachable Antennas, Resource CD, Power adaptor, 3 m (10-ft) Ethernet cable, Wall Mounting Kit, Installation guide, Warranty/support information card.
    System
    ManagementRemote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI), SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB.
    Security40/64-, 128-, and 152-bit WEP encryption, Block SSID Broadcast, VPN pass-through support, MAC address filtering with access control lists -- up to 256 users, 802.1x RADIUS support with EAP TLS, TTLS, PEAP, Wi-Fi Protected Access (WPA), Secure SSH Telnet, Secure Socket Layer (SSL) remote management login, Wireless isolation enables peer-to-peer blocking so users may not access another User's PC.
    System Requirements
    System RequirementsConfiguring the Access Point: Windows 98, Me, 2000, or XP, 2 Mbytes of available disk space.